AGPHVSOL12DN50B001
DN50 12 V Hydraulic Valve - Bermad
Hydraulic irrigation valve for DN50 water lines with Bermad-type body construction and 12 V solenoid pilot control. Designed for agricultural irrigation, greenhouse irrigation, fertigation, and water distribution automation where reliable remote flow control and stable hydraulic performance are required.
Identify your product
Match AGPHVSOL12DN50B001 to your product label before using these specifications. Ratings and features apply to this SKU, not every model in the family.
Before installation
- Check the product and supplied parts for damage.
- Confirm the ratings below against the label and supplied installation instructions.
- Use qualified personnel for electrical or pressurised-system installation. Isolate power and release pressure before work.
- Follow the supplied model-specific wiring and commissioning instructions. If these are missing or unclear, contact support before installation.
Specifications
Valve Information
| Parameter | Value |
|---|---|
| Valve Type | Hydraulic Control Valve |
| Body Style | Bermad |
| Valve Size | DN50 (2 in) |
| Connection Type | Female threaded BSP |
| Manual Override | OFF / ON / AUTO selector |
Mechanical Performance
| Parameter | Value |
|---|---|
| Working Pressure Range | 0.35–10 bar |
| Pressure Rating | PN10 |
| Max Operating Temperature | 60°C |
| Diaphragm Material | Reinforced rubber |
| Body Material | PA (Polyamide) |
Solenoid Specifications
| Parameter | Value |
|---|---|
| Solenoid Type | Normally Open |
| Coil Voltage | 12V DC |
| Operating Pressure | 0–10 bar (0–140 psi) |
| Max Ambient Temperature | 60°C (140°F) |
| Max Liquid Temperature | 60°C (140°F) |
| Open Current | 90 mA |
| Holding Current | 75 mA |
| Base Interface Size | 1/8″ BSP |
| Filtration Requirement | >80 mesh |
Compatibility
| Parameter | Value |
|---|---|
| HPzenAi Gateway | Supported |
| HPzenAi Relay Controller | Supported |
Package contents
- Valve Unit: Primary valve hardware for flow control and field installation.
- Installation Guide: Reference guide for plumbing integration, wiring, and field setup.
Use cases
- Drip Irrigation: Supports controlled water flow, pressure handling, and line management across drip irrigation networks and field zones.
- Sprinkler Networks: Works in sprinkler networks where dependable hydraulic control is required for even water distribution.
- Precision Farming: Fits connected agriculture workflows that combine monitored water delivery with automated field management systems.
- Fertigation Systems: Supports controlled water movement in fertigation lines where irrigation and nutrient delivery are combined.
- Greenhouses: Supports greenhouse and protected-cultivation systems that require reliable and controllable hydraulic flow management.
Warranty
12-month limited warranty
- Manufacturing defects under standard use conditions
- Internal sealing and body faults verified by support
- Factory accessory issues reported within the covered service window
Service
- Remote diagnostics and guided troubleshooting from HPzenAi support
- Service request coordination for repair or replacement review
- Availability of spare parts during service life
Eligible direct orders can be reviewed for replacement support for verified transit damage or early manufacturing defects under the applicable policy.
Need help?
Provide your SKU and the symptoms when contacting support. Do not share passwords or recovery secrets.